Three things you should pay attention to when using turntable bearings!

As a key component in industrial equipment, the performance of turntable bearings is directly related to the overall operation and safety of the equipment. Therefore, when using turntable bearings, relevant regulations and precautions must be strictly followed to ensure their normal operation and extend their service life. This article first introduces three key points that need to be paid attention to when using turntable bearings:

First, when installing and removing the turntable bearing, you must follow the manufacturer's installation and removal instructions and use the correct tools and equipment to avoid damaging the bearing and other equipment. During the installation process, ensure that the shaft and bearing are hoisted and gently placed into the bearing seat as a whole to avoid excessive impact and vibration. At the same time, when heating the inner ring of the shaft, control the temperature to avoid excessive temperature causing damage to the bearing. Before removing the bearing, the load on the bearing must be removed to avoid unnecessary damage to the bearing and equipment.

Secondly, lubrication and maintenance are important links that cannot be ignored during the use of turntable bearings. Recommended lubricants should be used and replaced regularly to ensure that the bearings are in good lubrication. When replacing lubricants, the lubrication area should be cleaned and the bearings should be checked for damage or wear to detect and deal with problems in a timely manner. In addition, the slewing bearing seal should be checked regularly to see if it is intact. If the seal is found to be off, it should be reset in time. If it is damaged, it should be replaced immediately to prevent foreign matter from entering the raceway.

In addition to lubrication and maintenance, keeping the bearing and its surroundings clean is also one of the things you need to pay attention to when using turntable bearings. Even small dust that is invisible to the eyes can have adverse effects on the bearings. Therefore, the bearings and their surroundings should be cleaned regularly to avoid the accumulation of dust and debris. At the same time, during the cleaning process, pay attention to using clean cloth or paper to wipe the bearing surface, and avoid using cloth or paper with foreign matter or moisture to avoid damage to the bearing.

You can contact us if you have any requirements!